How to upgrade firmware ILOM by Command Line Interface {CLI}

1. Download TFTP server for Windows by Ph. Jounin (if you use windows desktop)
2. start TFTP server
3.  
   
   

   
   from CLI
   =========
   -> load -source tftp://172.17.254.161/ILOM-3_0_6_15_f_r101655-Sun_Fire_X4150_X4250_X4450.pkg
   NOTE: An upgrade takes about 6 minutes to complete. ILOM
         will enter a special mode to load new firmware. No
         other tasks can be performed in ILOM until the
         firmware upgrade is complete and ILOM is reset.
   
         You can choose to postpone the server BIOS upgrade until the
         next server poweroff. If you do not do that, you should
         perform a clean shutdown of the server before continuing.
   
   Are you sure you want to load the specified file (y/n)? y
   Preserve existing configuration (y/n)? y
   Delay BIOS upgrade until next server poweroff (y/n)? y
   .........................................................................................................................................................
   
   Firmware update is complete.
   ILOM will now be restarted with the new firmware.
4. wait until ILOM reboot if self